IMMA GLOBAL SANAYİ MAMULLERİ A. Ş.

IMMA has a wide range of crushing line consisting of jaw and impact crushers as primary, secondary and tertiary purposes. In addition to screen, conveyor belts, washers, rock drill, etc. Also IMMA provides a full partnership for a full and solution for any quarry requirements, for any rock type from starting 50 tph capacity up to 1200 tph, including:

Jaw Crusher
Impact Crushers
Cone Crushers
Grizzly Screens
Bunker & Hoppers
Washers
Pre-Crushers
Mobile Unit
Belts & Conveyors

Also trucks, trailers, concrete batching, etc.

Crushing & Screening Equipment

LOWBED SEMI-TRAILERS

* Loading weight - Payload 40tons to 120 tons
* Custom design
* Custom loading paltform
* Heavy duty tropical & desert approved axles: from 2 to 12
* Suitable for 4x2, 6x4, 6x6, 8x4 tractor heads

Lowbed / Lowloader Semi-Trailer

A wide range of cranes as FEM, DIN, VDI, CMMA norms with application of indoor, outdoor (able to cladding by sandwich panels), concrete buildings, steel structures, offshore / marine and custom requirements.

- Gantry Cranes
- Single & Double Girder Cranes
- Monorail Cranes
- JIB Cranes
- Spreader Beams
- Hoist / Winch / Portal Cranes

* All IMMA Cranes are installed with: Precise speed control
* Double speed acceleration
* RF Remote & cable controller
* Light & sound warnings
* EU/CE normed electrical installation Limiter switches
* Easy installation & demounting
* Pre-tested and inspected before shipment 
* Warranty, spare parts, user manuals

Overhead Cranes EOT

Model: IMMA FBT Series
Multi-Purpose Flatbed Semi-Trailer
Reinforced Body for Tropical, Desert and Arctic Conditions EEC Normed as per EU Norms
Size (L x W): 12.400 x 2.550 mm (Up to L: 13.900mm)
Chassis:
 * Heavy duty resisting steel with I crossed profile chassis
Axles:
  * 2, 3  or 4 units, Heavy Duty type
  * 12, 14 or 16 tons/axle payload,
 * Tropical or desert conditioned
 * Mechanical springs (Or air suspensions)
 * Asbestos free brakes,
 * Single or double tired
 * 2” and 3,5” King Mile (42 Cr-4 Mo) as per SAE/DIN standards,
 * WABCO EBS,
 * Landing Legs: 2 pcs x 24 tons
 * Tires & Rims: 4+1 to 12+1 pcs all steel
 * Phosphate coated sandblasted double layer epoxy interlined acrylic painted, as per RAL7037 grey color 
 * 24 V Electric installation as per EU norms, 
Accessories: 
* Rear bumper: Folding, pressed cage, made of ST-37 steel, 
* Mudguards
* Food box
* Toolbox
* Fire extinguisher box 
* Step tire point

IMMA FBT Semi-Trailers can be equipped for:
o	DRY GOOD: Steel patterned floor for dry good carriage
o	CONTAINER: 8 x Container locks (2x20’ or 1x40’), ISO type
o	TIMBER: Timber Apparatus: 2x6 pcs poles around the side, removable, 1.000 mm length, pole holes connected to strengthened side chassis of 8mm

Multifunction Flatbed Semi Trailer

* Model: SBT Line
* Specially designed for bulk cement and powder products, § Internal volume: 20 to 60 m3
* Heavy duty mono-block chassis,
   • 7.200 l/min compressor with electric or diesel engine,
   • 2 x Manhole tap for loading
   • 4” discharging with butterfly valve
   • 2 x Pneumatic valve monometer, 4 bar
   • 2” Air pipeline installation,
   • Walkaway on the top,
   • 11 x collectors with double sided, located inside the silo,
   • 6 mt cement tube (for discharging)
   • Jet 11/11 additional cement discharging air ,
   • Exhaust valve 1⁄2”
   • Automatic safety ventile 1”
   • Extra air outlet valve (11⁄2”) for discharging a 2nd vehicle,
* Brake System: As per EEC97/12 regulations, double-circuit pneumatic,
* Pilot type air-suspension axles with Z scissor system (BPW compatible)
* 2 lays of epoxy primer coated body after sand blasting and undercoating
* 24 v Electricity installation as per EEC Norms.
* Accessories:
   • Fenders,
   • Tool box,
   • Reflector,
   • Stair ,

Optional Items for IMMA SBT Semi-Trailers:
 * Diesel engine powered compressor
 * Wabco EBS
 * Spring type axles for heavy-duty conditions

Silo Semi Trailers

IMMA TST Line: Tanker Semi-Trailer
* Multi purpose applications for various materials as asphalt, fuel-oil, diesel, water, etc.
* Internal volume: Optimal 33.300 lt (Capacities from 24.000 up to 55.000 liters)
* Shape: Elliptic
* Overall Length: 10.500 mm (up to 14.500mm) 
* Multi heavy-duty axles
* Heavy-duty chassis
* Tank Body & Equipment:
   o	Single/triple compartment with 3 no. of beaters
   o	Steel/aluminum/stainless steel materials
   o	2 x Manhole tap for loading
   o	2” discharging unit with butterfly valve with 15 meters tubing
   o	Stairs and walkaway on the top
* King pin: 2” and 3”
* OMS 3rd wheel (2 x 24 tons)
*  Tyres: 4-6-12 units, Bridgestone – Pirelli – Fulda - Lassa make, 385/65R22.5 size with 11.75x22.5 wheels (+1 unit step set)
 * 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
* 24V Electricity installation as per EEC norms with 7 functioned rear lambs and 6 side lambs.
* Spare tire locater, accessory box, food box, small water tank (for driver), rear bumper, stair, water tanker, fire extinguisher box 

Optional Items:
 - ABS/EBD Brakes
 - Internal PU coating for drinking water transport
 - Stainless steel tank body
 - Pump for discharging
 - Pump for charging and/or discharging
 - Diesel engine for pump
 - PTO for pump
 -Various volume x axle capacity & combinations
 - DSS™ application for non-explosion tanker (Please ask for IMMA's patented innovative product DSS™)

Tank Semi Trailers

Garbage Truck

Cryogenic Tanks for
•	Liquid nitrogen (LIN),
•	Liquid argon (LAR),
•	Liquid oxygen (LOX),
•	Liquid carbon dioxide (LCO2),
•	Liquid hydrogen (LH2),
•	Liquid natural gas (LNG),
•	Liquid nitrous oxide (LN2O) with
•	a capacity range up to 100,000 liters
•	working pressures of 18, 22, or 36 bar
•	complying EU Pressure Equipment
•	Directive (PED) & ASME Standards in
•	addition to GOST and other local regulations.
•	vacuum-insulated
•	vertical or horizontal installed
•	inner vessels & piping made of stainless steel ability.
•	Regasification Stations
•	Stationary & Bulk Cryogenic Tanks for REGAS & Filling Stations
•	Filling Stations
•	Cryogenic Semi-Trailers
•	Cryogenic Skid Containers
•	Cryogenic Tanks
•	Turn-Key Projects for Regasification /
•	Distribution / Storage
•	Power Generating: LNG Power Plants


Cryogenic Tanks and Trailer

Steel Structures

IMMA Gantry / Portal Cranes

A wide range of cranes as FEM, DIN, VDI, CMMA norms with application of indoor, outdoor (able to cladding by sandwich panels), concrete buildings, steel structures, offshore / marine and custom requirements.

All IMMA EOT Cranes are installed with:
- Precise speed control
- Double speed acceleration
- RF Remote & cable controller
- Light & sound warnings
- EU/CE normed electrical installation
- Limiter switches
- Easy installation & demounting
- Pre-tested and inspected before shipment
- Warranty, spare parts, user manuals

> Capacity: 500 Kg - 80.000 Kg
> Bridge Length: 3.000mm - 40.000mm
> Lifting Height: 4.000mm - 80.000mm

Gantry - Portal Crane

Complete Powder Gypsum Plant
*  Turnkey project
* Custom solutions
* Complete Solution, including
  - Crushing System	: Jaw/hammer crusher + screens 
  - Grinding System	: 2–4 Raymond/vertical mills 
  - Calcination System	: Fluidized bed boiling furnace (ebullition type) with heat conductive oil indirect heating
  - Heat Supply		: Fuel oil, natural gas, coil fired thermal oil boiler (heavy/diesel oil compatible)
  - Cooling & Aging	: Cooling device + optional aging silo
  - Conveying			: Bucket elevators, screw conveyors, belt conveyors
  - Dust Collection		: Bag filters/electrostatic precipitators (emission

Powder Gypsum Plant

IMMA VCR Dry Screens are designed for best in the class solution in terms of productivity, efficiency and operational.

Designed for fine mineral processing of:
o	Construction Chemicals 
o	Moisty Clay
o	Emery and Silica Sand
o	Perlite
o	Limestone
o	Gypsum
o	Aluminum
o	Calcite
o	Olivine
o	Zeolite
o	Magnezite
o	Bentonite
o	Pomice

Please ask for your requirement to come up with our solutions

Dry Screen

IMMA VCR Wet Screens are designed for best in the class solution in terms of productivity, efficiency and operational.

Designed for fine mineral processing of:
o	Construction Chemicals 
o	Moisty Clay
o	Emery and Silica Sand
o	Perlite
o	Limestone
o	Gypsum
o	Aluminum
o	Calcite
o	Olivine
o	Zeolite
o	Magnezite
o	Bentonite
o	Pomice

Please ask for your requirement to come up with our solutions

Fine / Micronized Screen - Sieves

IMMA Cone Crushers
CAPACITY : 70-1.200  tph
FEEDING SIZE : Up to 1200x1600 mm 
Large crushing ratio, 
High production efficiency: 
High eccentricity, large crushing ratio, fast speed, up to 750 RPM 
Improved production capacity by 30%~40%;
Hydraulic protection and hydraulic cavity cleaning, 
High automation, 
Reduced downtime; 
Integrated hydraulic lubrication, thin oil lubrication system design, the use of U\T labyrinth seal and positive pressure fan to ensure reliable dust;
To achieve flexible cavity type switching through replacing liner, cutting ring, fastening bolts; 
Reasonable structure, reliable operation, less consumption of wearing parts, low operating cost;
The same upper chamber group can be used for coarse, medium and fine cavities, which greatly enhances the convenience and flexibility of customer use;

Cone Crushers

IMMA Global provides full services for your mining projects including

- Heavy Equipment (Including Excavators, Loaders, …)
- Mining Equipment for Open pit and Underground
- On-road & Off-road Trucks
- Underground Trucks
- Drilling Rigs
- Pumps
- Generators
- Cranes
- Base Camps
- Spare Parts and Consumables (Genuine, original, OEM & aftermarket)
- Project Management
- Plant & Facility Operation

with international reputable brands (including Caterpillar, Komatsu, Sandvik, Metso, Mercedes-Benz, Iveco, MAN, Wartsila, Hitachi, Atlas Copco, Epiroc, Cifa, Volvo, ...) as a complete service and mining processing plant.

Supplies & Parts

Spare parts including engines, transmission, final drives, gear, slewing gears for CAT, Komatsu, Atlas Copco, Epiroc, Volvo, Liebherr

OTR tires, lubricants and oil including Bridgestone, Good Year, Total, Shell, Castrol

Axles, gears, gearbox including Dana, Allison, ZF

Complete new, unused, reman engines of Cat, Komatsu, Cummins

REBUILT UNITS IN STOCK:

CATERPILLAR Torque Converters: 343-9846	359-6482	359-6482	180-0567	124-5570	346-5835	109-0171	126-5483	357-0696	346-5837	145-7109	357-0695	317-1017	307-9981	240-7186	124-8506	116-5811	117-3357	117-3357	249-5539	8E-8999	479-4517	392-3633	279-2522

CATERPILLAR Cylinders: 289-8616	194-6171	288-5537

CATERPILLAR Differentials: 352-3191	213-5173	110-9292	119-1792	119-1792	316-8324	118-9704	137-8851	137-8851	316-8324	137-8851	368-5018	291-2627	291-2627	466-7422	466-7421	135-0471	8X-7240	266-2091	104-9410	9D-6130	273-9007	250-8204	8D-4290

CATERPILLAR Engines: 341-3157	587-5932	630-7428	240-7750	100-8094	259-3143	7HR00137	180-4188	538-5153	259-3143	BPC00188	538-5149	514-4913	511-1398	631-5443	156-6240	365-9315	100-8085	362-3139	195-3816	464-2885	399-1828	227-5359	204-7983

CATERPILLAR Final Drives: 343-5375	282-4029	110-2656	137-3505	137-3505	107-0701	107-0701	595-2456	192-0822	280-3580	192-0822	192-0822	382-1770	334-5493	334-5492	334-5492	334-5492	257-6310	219-0338	366-9156	126-8347	257-6306	485-2791	423-5798	5T-7158

CATERPILLAR Transmission: 308-0081	372-6094	372-6094	239-8137	153-7520	283-7702	283-7702	192-2914	357-1120	346-6114	137-6229	357-1120	550-2459	307-9982	479-1630	240-7184	9U-9822	3T-0034	3T-0034	246-2647	8E-9035	145-7407	374-2616	253-8407	183-6616

Ask for other components!

Heavy Equipment Spare Parts

Auxiliary and supportive equipment as generator set, compressor, pumps for mines including 
* CAT, Komatsu, Sandvik, Wartsila, etc genset
* Atlas Copco, Ingersoll Rand, Sullair, etc. compressor & boosters
* ITT, Goulds, Grundfos, Wilo, pumps
for mines and construction sites

Mining Auxiliary Equipment

Rebuilt Final Drive 
* Genuine Core Parts
* Rebuilt by genuine spares
* In-stock for Caterpillar Rebuilt Engine & Components for D11T, D10T2, D10T, 994F, 994D, 992K, 992G, 988G, 988K, 854K, 834G, 834K , 797F, 793F, 793D, 793C, 789C-B, 785C, 777F, 777D, 777B, 777C, 773E, 24M, 16M, 16H
* Available in-stock OEM Components & Parts: 343-5375	282-4029	110-2656	137-3505	137-3505	107-0701	107-0701	595-2456	192-0822	 280-3580	192-0822	192-0822	382-1770	334-5492	257-6310	219-0338	366-9156	126-8347	 257-6306	485-2791	423-5798	5T-7158
* Ask for non-listed final drives and transmission and engines for your mining equipment of Caterpillar, Komatsu, Terex, Hitachi, ...

Rebuilt Final Drive

Rebuilt Complete Engines for Caterpillar Equipment
* Genuine Outright Engines
* Rebuilt by 100% Genuine Parts
* Dyni Tested
* In-stock for Caterpillar Rebuilt Engine & Components for D11T, D10T2, D10T, 994F, 994D, 992K, 992G, 988G, 988K, 854K, 834G, 834K , 797F, 793F, 793D, 793C, 789C-B, 785C, 777F, 777D, 777B, 777C, 773E, 24M, 16M, 16H
* Available in-stock Caterpillar rebuilt complete outright engines : 341-3157	587-5932	630-7428	240-7750	100-8094	259-3143	7HR00137	180-4188	538-5153	259-3143	BPC00188	538-5149	514-4913	511-1398	631-5443	156-6240	365-9315	100-8085	362-3139	195-3816	464-2885	399-1828	227-5359	204-7983 
* Ask for non-listed engines and components for Caterpillar, Komatsu, Cummins,  ...

Complete Rebuilt Engines

IMMA's VOMS-M160 MOBILE ASPHALT PLANT:

No worries for quality & mobility!
 
•	Highly developed mobile version of successful VOMS Stationary continuous asphalt mixing plants. 
•	Designed for high mobility (Starts up in 3 hrs)
•	Equipped with a continuously running two-shaft paddle mixer
•	Controllable outlet gate that enables:
        - The filling height, which reduces losses start-up and shut-down
        - The filling mixing time adjustments based on recipe and throughput
•	Mixing time to be set depending on recipe and output. 
•	Compact and flexible continuous asphalt planting
•	Produces high-quality asphalt thanks to the clear separation of the drying and mixing 
•	Reclaimed asphalt, fibers, etc., can be added away from the heat source.
•	Super compact, tarting from 120 up to 140 t/h. This is a super compact asphalt plant.
•	Installed on a single semi-trailer, offers maximum flexibility
•	Clearly separating the drying and mixing processes leads to significant advantages with regard to mixing quality and emission behavior. 
•	Zero risk of bitumen vapors or filler material contaminating the exhaust air as the dryer is fully self-contained.
•	Hi-tech mixing, detached from the thermal process; that assures possible to adapt the mixing process to a specific mixing task and to feed additives such as reclaimed asphalt or fibers into the mix far away from where the heating process takes place.

Mobile Asphalt Plant

IMMA Global A.S. as a member of VOMS Group of Companies, rooted since 1999, established in 2006 to produce mining machinery and equipment. The progressive approach reasoned to design & produce follow-up machines during the years, starting from tipper trucks to jack-up barges for any mining and construction works. Re-formed as a Turkish-Belgium JV in 2010 to enlarge the activities in manufacturing, worldwide distribution, contracting and solution providing for construction, mining, logistics, commodity and energy companies in the global markets to reduce costings and obtain flexibility.

As an EPC company, IMMA is dedicated for

* engineering,
* progress and
* challenge;

which helps to develop each unique product to be the source of R & D, step by step that is consequence of IMMA’s experience and customer expectations.

IMMA is not only a manufacturer of mining machinery, concrete plants, heavy equipment, base camps, offshore vessels, truck body and semi-trailer; but also operates, assembles, uses and contracts those with a high experienced and skilled master teams for each area. 

IMMA also one of the largest manufacturer and supplier for genuine and rebuilt  components of  'Torque Converter',  'Differential',  'Final Drive', 'Axle',  'Transmission' and hydraulic cylinder groups for heavy mining equipment of Caterpillar, Komatsu, Sandvik, Epiroc, etc. brand. 

Currently been serving to Europe, Africa, Middle East and Central Asia via custom made standardized products with global partners / distributors.

Major products and activities can be listed as:

Machinery & Equipment Manufacturing:
* Crushing and screening equipment,
* Rebuilt components and engines
* Fine and micronized screen / sieve for mineral enrichment and processing
* EOT and portal cranes, hoists and lifting equipment
* Trucks and semi-trailers
* Industrial buildings and structures, steel fabrication, warehouses and premises
* Cryogenic and conventional tanks, distillation stations, transport units, skids,  power units

Steel Fabrication:
* Individual design of machines, processing plants, tools, materials
* Steel fabrication, welding, finishing on contract or sub-contract basis,
* Steel structures, including commissioning and operation

Supplies: 
* Heavy equipment parts, engines and components  (for CAT, Komatsu, Liebherr, Atlas Copco, Epiroc, Doosan, Hitachi, CNH, etc.) as original, OEM, remanufactured
* OTR and truck tires and rims
* Pumps, conveyors, generator set, compressor, etc.
* Spare parts and consumables for any mining and construction equipment worldwide.

Imma Global Sanayi̇ Mamulleri̇ A. Ş. / About :

Cryogenic Tanks and Trailer - ( Made In Turkey / Turkish Products )

Sectors

Imma Global Sanayi̇ Mamulleri̇ A. Ş. Export Products

Imma Global Sanayi̇ Mamulleri̇ A. Ş. - Cryogenic Tanks And Trailer Export Products

Imma Global Sanayi̇ Mamulleri̇ A. Ş. / Products